Grease traps are typically reservoirs interceptors, which are different in sizes, and built into piping system of discharging far distance from production area of grease. The traps baffles slows the wastewater flow making the turbulence reduction which allows the separation of water and grease.Naturally, grease rises to the surface and retaining of grease by trap to allow the wastewater with no grease to flow directly to the system of the sewer.However, the removal of grease from the trap must be done periodically.
For the grease to get to sewer line, the grease trap have to capture it in the system channel. The system of grease trap is applied much to many restaurant and cafeterias. The grease trap ensure the grease and oil capturing from the wastewater. Therefore, the cooling process of grease and oil will be able to separate the water flow and ensure floating over the trap. After cooling of water, it flows down through downpipe toward the sewer making baffles prevent the grease and oil to accumulate from passing out of the traps of grease.It is from the volume of the production of waste by your business that you can estimate the grease trap size.In addition, the times you carry your maintenance on traps is very essential.
The installation of grease trap can be either inside or outside the apartment.When you locate a trap inside the building; it will look smaller and thus frequent maintenance will be needed. The outside traps look larger that need major repairs. Cold season can dispose traps to clogs, but in winter and summer the outside traps behave differently.However, the director of the business or the manager should have the knowledge of where the drain lines, clean outs and grease traps are positioned in the restaurant.
Case Study: My Experience With Systems
When you consider the cleanliness and best maintenance of the grease trap and drain lines to keep off the oil and grease from getting in the public sewer. The allocation of various inspectors are chosen to ensure the business traps are periodically maintained.The reason is that the untrapped grease and oil contained in the wastewater will reduce the capacity of the pipe over time and finally make the pipe to clog
What No One Knows About Kitchens
However, the piping system that does not have the grease traps will require being cleaned regularly, and replacement of piping can be made sooner than expected. The excess moved grease to the wastewater treatment plant can overload the system and ensure making the facility to carry excess discharge limits that are not acceptable.